首页 > 海鲜 > > 详情

电脑蓝屏提示代码0x000001C6怎么办

来源:互联网 2023-08-28 00:54:15
x

蓝屏代码0x000001C6代表"FAST_ERESOURCE_PRECONDITION_VIOLATION",这意味着发生了快速资源先决条件违规。这个错误通常与资源管理相关,可能是由于资源锁定或释放的问题导致的系统崩溃。

要解决这个问题,可以尝试以下方法:


(相关资料图)

方法一:修复系统文件错误

运行系统文件检查工具(SFC)以检测和修复任何损坏的系统文件,打开命令提示符并以管理员身份运行" sfc /scannow "命令。

方法二:运行内存测试

使用内存检测工具(如MemTest86)对计算机的内存进行全面测试,以排除内存故障导致的蓝屏问题。

方法三:禁用或卸载不必要的驱动程序

某些第三方驱动程序可能与内核资源发生冲突,尝试禁用或卸载最近安装的驱动程序,以验证是否解决了问题。

方法四:使用一键修复工具助手(强烈推荐)

1、首先你的电脑必须下载与完成安装完成快快蓝屏修复助手。如果你还没有安装点击下方链接下载。

下载地址:>>>快快蓝屏修复助手<<<

提示:安装路径不要选择C盘,避免产生问题造成损失。

2、找到你电脑中的快快蓝屏修复助手,点击进入。看到首页后,点击首页一键扫描按钮开始扫描。等待几分钟,就能获取你急切想要的结果。

3、扫描完成后会显示电脑的所有蓝屏记录以及蓝屏的详细信息。

4、解决方案页面显示了导致该次蓝屏的具体原因和解决方案,点击右上角的一键修复进行修复。

5、切记,当修复完成之后我们还是需要重新启动计算机的。毕竟一切修复的结果,需要重新后,才能被系统认可。

当你完成重启后,你电脑的蓝屏问题已经基本解决了。相信小编,不要急需卸载快快蓝屏修复助手。毕竟它强大的功能是你未来的一个保障,可以随时随地为你服务,让你再次遇到蓝屏问题不在抓狂。

其他相关信息:

FAST_ERESOURCE_PRECONDITION_VIOLATION bug 检查值为 0x000001C6。 它指示当前线程正在对快速资源例程执行无效调用。

FAST_ERESOURCE_PRECONDITION_VIOLATION参数

参数描述
1冲突类型。 请参阅下面的值。
2请参阅下面的值。
3请参阅下面的值。
4请参阅下面的值。

冲突类型

0x0 : The Irql of the caller was greater than the maximum allowed                  Irql for the routine.                2 - Irql of the caller.                3 - Maximum allowed Irql of the routine.            0x1 : The caller specified an invalid (i.e. uninitialized) owner                  entry.                2 - Pointer to the owner entry.            0x2 : The caller specified an owner entry that was already                  associated with a lock acquisition.                2 - Pointer to the owner entry.                3 - Pointer to the resource to which the owner entry is already                    associated.            0x3 : The caller passed a legacy resource to a fast resource                  routine.                2 - Pointer to the resource.            0x4 : The caller specified a resource that has outstanding lock                  acquisitions.                2 - Pointer to the resource.            0x5 : The caller was executing inside of a DPC.            0x6 : The caller was executing inside of a Special Kernel APC.            0x7 : The caller did not ensure Normal Kernel APCs were disabled.            0x8 : The caller specified an owner entry that was not associated                  with a lock acquisition of the specified resource.                2 - Pointer to the resource specified.                3 - Pointer to the owner entry.                4 - Pointer to the resource with which the owner entry is                    associated.            0x9 : The caller specified an owner entry that was not associated                  with the calling thread.                2 - Pointer to the owner entry.                3 - Pointer to the thread with which the owner entry is                    associated.            0xa : The caller specified an owner entry which has been disowned.                2 - Pointer to the owner entry.            0xb : The caller specified an owner entry with a different                  acquisition type than the caller indicated.                2 - Pointer to the owner entry.                3 - High-16 bits indicate the acquisition type of the owner                    entry. Bottom-16 bits indicate the acquisition type                    specified. 1 = Shared, 0 = Exclusive.            0xc : The caller specified an owner entry that was not associated                  with a lock acquisition of the specified resource.                2 - Pointer to the resource specified.                3 - Pointer to the owner entry.                4 - Pointer to the resource with which the owner entry is                    associated.            0xd : The caller specified an owner entry that has not been                  disowned.                2 - Pointer to the owner entry.            0xe : The caller passed a fast resource to a legacy routine that                  does not support fast resources.                2 - Pointer to the resource.            0xf : The caller passed a fast resource to a legacy routine that                  supports fast resources, but the fast resource was not                  initialized with EX_FAST_RESOURCE_ENABLE_LEGACY_APIS.                2 - Pointer to the resource.            0x10 : The caller passed invalid flags to ExInitializeFastResource.                2 - Pointer to the resource specified.                3 - The flags specified.            0x11 : The caller passed a thread other than the current thread to                   ExReleaseResourceForThreadLite.                2 - Pointer to the resource specified.                3 - The thread specified.            0x12 : The caller attempted to disown a resource that had been                   recursively acquired exclusive by the current thread.                2 - Pointer to the resource specified.            0x13 : The caller attempted to convert a resource acquisition while                   the calling thread had outstanding recursive acquisitions of                   the resource.                2 - Pointer to the resource specified.            0x14 : A thread exited with outstanding lock acquisitions.                2 - The thread.                3 - Pointer to one of the outstanding owner entries.            0x15 : A thread exited with outstanding disowned lock acquisitions.                2 - The thread.                3 - Pointer to one of the outstanding owner entries.            0x16 : A call to ExConvertExclusiveToSharedLite was made by a thread                   that did not hold the specified resource exclusive.                2 - Pointer to the resource.                3 - Pointer to the thread.

原因

当前线程正在对快速资源例程执行无效调用。

解决方法

!analyze 调试扩展显示有关 bug 检查的信息,并有助于确定根本原因 。

另请参阅

Bug 检查代码参考

分享至:

上一篇:TCL电子上半年光伏业务收入增长八倍 全年目标40亿港元 下一篇 :最后一页
x

推荐阅读

更多推荐